带攻角约束的高超声速飞行器自适应反步控制器设计

针对带攻角(AOA)约束的高超声速飞行器控制问题，提出一种基于非对称时变障碍函数的非线性自适应反步控制方法。首先，将飞行器模型化为严反馈形式，以反步法为基础进行控制器设计。然后通过光滑饱和函数对名义攻角指令信号进行限幅，并保证限幅信号的可导性，限幅产生的误差通过设计辅助系统进行补偿。进而使用障碍函数对攻角指令跟踪误差进行非对称时变约束。针对不确定性和干扰，设计新型自适应律对集中干扰上界进行估计并补偿。最终通过Lyapunov理论证明了闭环系统状态量一致最终有界并且攻角始终满足时变约束。仿真结果表明，本文方法能够在满足攻角约束基础上保证良好跟踪性能。     

Bayesian coronal seismology

In contrast to the situation in a laboratory, the study of the solar atmosphere has to be pursued without direct access to the physical conditions of interest. Information is therefore incomplete and uncertain and inference methods need to be employed to diagnose the physical conditions and processes. One of such methods, solar atmospheric seismology, makes use of observed and theoretically predicted properties of waves to infer plasma and magnetic field properties. A recent development in solar atmospheric seismology consists in the use of inversion and model comparison methods based on Bayesian analysis. In this paper, the philosophy and methodology of Bayesian analysis are first explained. Then, we provide an account of what has been achieved so far from the application of these techniques to solar atmospheric seismology and a prospect of possible future extensions.     

基于轨道角动量的电磁涡旋SAR成像新方法

为研究电磁涡旋波在合成孔径雷达(SAR)领域的应用潜力,验证电磁涡旋SAR成像的可行性,将电磁涡旋与合成孔径雷达模型结合,通过使用单一模式的轨道角动量,用合成孔径原理实现方位聚焦。给出了基于电磁涡旋的SAR几何模型和回波信号模型,并提出了适用于电磁涡旋SAR的改进chirp-scaling(CS)成像算法。通过点目标仿真分析,验证了所提成像算法的有效性。该方法可为SAR系统新体制设计及雷达的研究提供参考。     

A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

基于DOA聚类算法的ARM抗有源诱偏技术研究

有源诱偏技术是雷达对抗反辐射导弹的一种重要手段,可以大大降低反辐射导弹的作战效能。为提高对敌目标的精确打击能力,在分析闪烁诱饵诱偏原理的基础上,针对有源诱偏干扰下被动雷达测角精度与稳定度不高的问题,通过对有源诱偏信号的时域特征进行分析,提出一种基于脉冲前沿检测的DOA聚类分选算法,找出前沿超前的辐射源信号,实现了高性能抗有源诱偏干扰和高精度抗干扰测向。仿真结果表明,该技术可以有效对抗四点源有源诱偏干扰。     

PWM低速爬行状态系统波动分析

脉宽调制技术（PWM）在自动控制领域有着广泛的应用。然而，在实际工程应用的过程中，包含PWM的系统在低速驱动的条件下难以达到高精度速度指标的要求。在工程实践经验的基础上，对这一问题进行详细分析，提出PWM的截断效应和移频效应引起波动的理论，并结合典型的机电伺服系统模型进行仿真，完成仿真层面的验证。仿真结果展示了机电伺服系统在低转速状态下由于PWM的截断效应引起转速波动的现象，契合了实际系统中表现的情况，验证了截断效应和移频效应的正确性，为提高系统精度指标提供了依据。     

非恒定增压式微尺度拉瓦尔喷管流动特性

针对微尺度喷流在航天器运动状态切换时出现的非恒定增压变化,采用直接模拟蒙特卡洛(DSMC)方法对阶跃式增压和线性式增压两种模式下的微尺度拉瓦尔喷管流场进行了模拟,并对其变化过程中的流动特性进行了对比分析。结果显示：阶跃式增压会导致流动特性出现较大幅值的峰谷式波动,而线性式增压下的流动特性则呈现出线性变化的特点;黏性力对微尺度喷流的非恒定增压变化产生了重要的黏滞作用,在喉部扩张段至出口的流场中尤为明显;在设定的条件下,阶跃式增压过程中喷流产生的总冲量较线性式增压高59.5%,质量流量高74.7%,单位工质提供的冲量低约8.6%,波动性也高于线性式模型,阶跃式增压适用于系统需要较大推力改变运动状态且推进剂充足的情况,而线性式增压在系统精确微调或需要推进剂产生更高效能时具有明显的优势。     

航天器姿态大角度机动有限时间控制

针对航天器姿态大角度机动控制问题，在存在外部扰动的情况下，基于航天器姿态跟踪系统的标准级联特性，利用反步法和自适应控制设计有限时间控制器。提出的控制方法可以严格保证姿态大角度机动系统是全局有限时间稳定的。李雅普诺夫理论推导和仿真结果表明，系统在控制器的作用下可以快速机动到平衡点并保持稳定，全物理仿真试验进一步表明了所提出的控制方法的有效性和优越性。     

Reconfigurable fault-tolerant control for supersonic missiles with actuator failures under actuation redundancy

Aircraft undergoing actuator failures into under-actuation have been seldom studied in literature. Aiming at addressing actuator failures of Total Loss of Effectiveness (TLOE) as well as Partial Loss of Effectiveness (PLOE) resulting in different system actuations, reconfigurable Fault-Tolerant Control (FTC) is proposed for supersonic wingless missiles under actuation redundancy. The under-actuated system of TLOE failure patterns is solved by transformation to cascade systems through a ‘shape variable’. Meanwhile, actuator TLOE faults of different unknown failure patterns from proper actuation to under-actuation are accommodated by a reconfigurable adaptive law on a multiple-model basis. The backstepping technique with the Extended State Observer (ESO) method adopted as a basic strategy is applied to an established symmetric coupled missile system with actuator PLOE faults, modeling errors, and external disturbances. Additionally, the nonlinear saturation characteristics of actuators are settled by an auxiliary system with the Nussbaum function technique. The stability of the control system is analyzed and proven through Lyapunov theory. Numerical simulations are implemented in the presences of aerodynamic uncertainties, gust disturbance, and actuator failures. Results demonstrate the effectiveness of the proposed method with satisfactory tracking performance and actuator fault tolerance capacity.